The 1210 1psi is a temperature compensated,piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. It is intended for cost sensitive applications where excellent performance and long-term stability are required.
Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%.
Please refer to the 1210 standard datasheet for information on products with operating pressures greater than 1psi. For voltage excitation, please refer to the Model 1220.
量 程：0～1(psi)
精 确 度：±0.3%非线性
输 出：0～100mV
供电电源：1.5mA
工作温度：-40℃～125℃
电气连接：PC板封装
特 点：恒流供电，温度补偿
典型应用：医疗器械（呼吸机，监护仪），气体流量测量，制冷，过程控制
