产品详情:拾音器专用压电电缆
Piezo cable is another form of piezo polymer sensors. Designed as a coaxial cable, the Piezo polymer is the dielectric between the center core and the outer braid. When the cable is compressed or stretched, a charge or voltage is generated proportional to the stress.
Piezo cable has a number of advantages in certain applications. Due to its coaxial design, the cable is selfshielded,allowing its use in a high EMI environment. The piezo cable can be spliced to passive coax, using standard coax splice techniques. It is extremely rugged and will stand up to heavy loads. Its linear format makes it ideal for monitoring large areas.
In the cable construction, two narrow ribbons of PVDF film are helically wound around the inner conductor, which comprises 20 awg stranded silver-plated copper wire. The cable is then braided, and jacketed with an extruded high-density polyethylene.
The cable is available in short lengths (in multiples of 1 m), or as single cut lengths wound on spools.
类 型:电缆
外 径:1.6mm
电 容:950pF/m
耗 散:0.016@1kHz
供电电源:无源
工作温度:-
压电常数:20pC/N
特 点:连接简单,电压相应灵敏度好,耐温达85℃,可定制长度
典型应用:乐器拾音器
12-23
微型加速度传感器原理
低频加速度传感器是一款标准小、性价比高、以电压输出且无直流偏置的加速度传感器,低频加速度传感器具有设备简洁、丈量精度高、一致性好、抗干扰等特点,能满足用户多样化的要求。广泛应用在地基检验,桥梁检验,机械振动检验、接触式位移检验、地质勘探、地震波丈量、水轮汽轮机组检测等多个检验操控领域。低频加速度传感器设备办法1、螺栓联接:频响好,设备谐振频率较高,能传递大加速度。2、磁力设备座联接
02-26
特斯拉上海储能工厂将破土动工
特斯拉上海储能项目土地出让完成签约,标志着这一里程碑项目的正式启动。 据悉,特斯拉储能超级工厂项目位于上海市临港新片区,临近其上海超级工厂,规划生产超大型商用储能电池,并向全球市场供货。 工厂计划于2024年第一季度开工,第四季度投产。初期规划年产商用储能电池1万台,储能规